Twin work position design, are required with independent oil circuit, dual oil pump, double motor.
Vacuum pumping device draws out air in die cavity to avoid trapped gas, short injection, shorten forming period and improve product quality.
Suitable for rubber parts with complicated structure and difficult exhaust.
Open the mold design: a new type of patent guide rail. Special design can be 90 degrees open angle, easy to operate.
Mold handling design: in the mold handling agencies to join a special design. It is durable and quiet. Fast and outdated.
Hydraulic System Design: The system uses high-pressure pump and low-pressure pump, which can shut down two presses at the same time. The system is less noise, stable performance, and long service life.
Alignment: provide two different mold calibration speeds: fast and slow, the user can choose to use according to the actual situation. It makes calibration more secure and accurate.

2RT Machine motion flow:

1. Setup the mold (initial status)

2. Supply the material and start the process(close the mold)

3. Load the mold

4. The main ram goes up to the predetermined position ready for entering a state of vacuum

5. Lower the vacuum mask. At the same time, suck out the air until a state of vacuum is reached.

6. The main ram goes up. Increase the pressure to expel bubbles out.

7. After the state of vacuum exist mo more, lift the vacuum hood and curing.

8. After curing, lower the main ram.

9. Unload the mold, open the mold.

10. Take out the final product and put new material in.

Technical parameter

Technical parameter:

Model	Unit	100VF	200VF	250VF	300VF
Clamping Force	Ton	100	200	250	300
Upper Platen Size	mm	380*400	510*510	600*600	680*680
Lower Platen Size	mm	400*460	550*560	650*600	700*800
Plunger stroke	mm	200	250	250	300
Distance of Thermo-plate	mm	200	250	250	300
Distance of Tie bar	mm	490*230	640*310	745*310	785*380
Die sinking type	2RT-3RT-4RT-Track
Max Operating Pressure	Mpa	20	20	20	20
Motor Power	hp	7.5*2	10*2	10*2	10*2
Electric Heating Power	Kw	7.2*2	Product Tags: silicone rubber injection molding machine rubber vulcanizing press machine rubber moulding presses Inquiry Cart 0 Select All Contact Now Home Products Suppliers About Us Contact Us Help Site Map 公司介绍联系我们 Français Русский язык Español 日本語 Português China Hot Products: A \| B \| C \| D \| E \| F \| G \| H \| I \| J \| K \| L \| M \| N \| O \| P \| Q \| R \| S \| T \| U \| V \| W \| X \| Y \| Z \| 0~9 Copyright © 2009-2025 Everychina.com. All rights reserved. 京ICP备09074326号-4

Large Plate Vulcanizing Press Sealing Ring Silicone Rubber Moulding Press Machine

Open Mill Rubber Mixing