Qingdao Honghesheng Industry Co., Ltd.
Service as the basis, quality as the survival, science and technology for development
Add to Cart
Waste Tyre Piece cutter from strip block cutter tire cutting machine
product Introduction
tyre block cutting machine: is prepared for the crush of host machine, Not only it makes the cutting strip-type waste rubber cut into about 3*8cm small pieces, but also can enter into host machine again through mutual use between sword and fixed knife, convenient to feed, high output and won’t damage roller easily, power is 4.0kw, revolting speech is 380r/min,shape dimension: 1m*0.8m*1.4m. To pay attention to the space between sword knife and fixed knife when the machine is in operation, best to keep at around 0.1mm, so that the steel wire can be cut off.
Features:
Unique design, high output and long lifetime blade characterize secondary shredder and fine rubber shredder, which can improve the working efficiency and lower equipment maintenance cost.
Double-grinding pan rubber grinder is featured for low energy consuming and high output.
Reasonable construction, easy operation and low rate of breakdown.
Environmental-protection, no pollution(no waste gas, no waste residue, no polluted water), meeting the environmental requirement of the government.
Rubber powder production of waste tire recycling line is used to crush the waste tire into rubber powder. Environmental protection and energy saving, Market Prospect Broadness .
technique parameter
| Waste tire pretreating: Get 25-50mm blocks. | |||
| 1 | Ring cutter | QQJ-20 | 1 |
| 2 | block cutter machine | YQJ-285 | 1 |
| 3 | strip cutter | QTJ-380 | 1 |
| 4 | block cutter | QKJ-45 | 1 |
| Rubber powder treatment:5-30 meshes rubber powder. Separate steel wire and fiber from rubber powder. | |||
| 5 | Two roll rubber crusher | XKP-400 | 1 |
| XKP-450 | |||
| XKP-560 | |||
| 6 | Main conveyor | BCL-8 | 1 |
| 7 | Small conveyor | BCL-3 | 1 |
| 8 | Double-deck magnetic separator | BMS-22 | 1 |
| 9 | Single-deck Magnetic | SMS-1 | 1 |
| 10 | Main vibrating sieve | BSS-8 | 1 |
| 11 | Small vibrating sieve | SSS-3 | 1 |
| 12 | Fiber Processing Equipment | FS-1100 | 1 |
Second Production capacity and energy consumption ,you can choose suitable line
| NO | MODEL | Total Power(KW/h) | Production Capacity (kg/h) |
| 1 | XKP-400 line | About 103.2kw | 200-300kg for around 10-30 mesh rubber powder. |
| XKP-450 line | About 113.2kw | 400-500kg for around 10-30 mesh rubber powder | |
| XKP-560 line | About 132.2KW | 600-1000kg for around 10-30 mesh rubber powder. | |
| Floor space:About 20*8 m2, Workers needed:3 operator and 1 maintainer | |||
N
